the 4 digit Serial number is not legible, length is 19'9" so 20' ? rough shape, from the outside beam/width of the gunwales is 40" about 36.5"-37" inside / 12" center depth / 2.25" ribs with 2.25" spacing and 1" ribs between / 3" scuppers / brass rounded smooth bolt , screws with square nuts
unidentified Canoe / history
- Thread starter Ed Sciota
- Start date
Kathryn Klos
squirrel whisperer
Pictures are necessary to identify a canoe in most cases. The deck in the case of short-decked canoes can say a lot... and it's nice to see the profile of the bow or stern and get a look at the seats and thwarts. Where that serial number is located and whether it's on a plate or incised into the stem or a rib may also help. Where the canoe was found may help narrow down the possibilities too.
I hope we can come up with some answers for you--
Kathy
I hope we can come up with some answers for you--
Kathy
