Starting New Project - First Time Ever

Urban Hillbilly

New Member
Hello, I have what I’m told is about a hundred year old canvas covered wood canoe. Or at least that’s what I think I have. There’s so much fiberglass on it that it’s hard to tell. If anyone knows better, let me know. I have no vision of “restoring” this canoe, but after fishing the Pere Marquette with my son this fall, I decided it’s time to do something with this thing that’s been sitting around for ten years so I can use it. All I really want it to make it solid and look decent.

My plan was to simply sand it down well and then use filler and more fiberglass where needed and paint it. This is not going to be a show piece. I finally started this week and I already decided the outwales needed to come off. The inwales seem decent. So, sand down, filler and fiberglass, new outwales, paint and seat caning. Not even interested in refinishing the interior for now.

Thoughts? Suggestions? Decent idea or ridiculous? What do I watch out for? I’m pretty handy. I can gut a bathroom to the studs and completely rebuild it myself, but I don’t have much experience with woodworking and have never touched a wood boat.

Thanks,
Bill

IMG_9019.jpeg
IMG_9018.jpeg
IMG_9016.jpeg
IMG_9013.jpeg
IMG_9011.jpeg
IMG_9043.jpeg
IMG_9045.jpeg
IMG_9046.jpeg
 
Bill, looking at the next to last picture, is that fiberglass applied over canvas? If so, it would make the glass removal easy, and that is usually that hardest part of a restoration. So you might want to go all in, and take it off, then apply new canvas or Dacron. Probably easier than patching, and much more durable in the long term.
 
If I can chime in, definitely don't put more fiberglass on that canoe. You've a very nice old craft and it deserves to be restored. Like Todd said make it a family project and you'll never regret it, plus you'll enjoy a cedar canvas canoe that belongs on the water making memories!

You'll find all the advice you'll need here on this site, and there are many who'll walk you through any difficulties you may face along the way. Nothing you'll attempt to do in restoring this canoe hasn't already been done by those of us here in this forum and most questions can be answered by a search right here.

Enjoy the experience!
Gary
 
I have repaired fiberglass on plywood decks. My method is to scrape away any 'glass that will come off, and lay a patch, fairing later. I think in your case scraping will remove the whole skin. You can patch it by sanding the paint and some 'glass around the holes, the covering with glass cloth and resin. If you think you might replace the skin later, put some nonabsorbent fabric under the patch. The simplest quickest repair would be to apply duct tape over the holes. My next project has rotten canvas, I covered the bottom with duct tape. It works.
 
The canoe appears to be in decent condition, but it's been my experience that most of the time when a canoe gets glassed, there was more than a laziness or cosmetic reason for it. Often, you find (after removing the glass) that the stems won't hold tacks or some other reason why someone opted not to recanvas.
That said, slapping more glass over that would not be high on my list of options. It's really not a nicely done glass job. It must be as heavy as sin. Adding glass to patch the holes will probably make it harder to repair down the road. The old glass and resin do not adhere as well as these modern epoxies. You will get that epoxy stuck to the planking and really box yourself in for repair options down the road.
My suggestion is to take the glass and canvas off. If you want to glass it, do so. If you want to restore it, take a look at the stems after you pull that glass off and decide if it's worth the effort.
Nicely restored Old Towns are selling really cheap these days. You could buy a really nice canoe that is ready to go for not much more than it will cost to get that one turned around...and you would end up with an Old Town, a better canoe (in my opinion) than a Shell Lake.
 
An irreversible attempt at repair with epoxy and glass would waste your money. If you're concerned about canvassing, you can relax. Canvassing is so easy to do. It's only intimidating because you haven't done it. Shell lake made a good canoe. You don't see them often. If you do decide to strip the glass and canvas you will end up with less weight from the looks of it.
 
Back
Top