Old Town Lever Bolts
- Thread starter Carlton
- Start date
There are a number of sources for these. Robert Ross sells them if you are in a hurry as shown at the first link below. I believe they are also available from the Springfield Fan Centerboard Company but it may take longer. The bolts and lever nuts were also used on the Old Town motor brackets as shown in the third link below. I once purchased one and instructed the seller to just send the bolts so I could save on the shipping. Good luck,
Benson
www.woodencanoe.org
Benson
Sailing Canoe Hardware Mast Lee board Gudgeons Pintels | eBay
Included is most of what you might need to rig a canoe for sail. Finial details are mostly trial and error and or personal preference. Most the hard parts are here. This is a single lee board system.
www.ebay.com
Springfield Fan Centerboard Company | WoodenCanoeHeritage
www.woodencanoe.org
Old Town Double Block Canoe Standard Motor Mount With Brass Handle For Attaching | eBay
<p>This Old Town Double Block Canoe Standard Motor Mount with Brass Handle is the perfect accessory for canoeing enthusiasts. It is designed to make your canoeing experience more enjoyable and convenient. The mount is made by Old Town, a trusted brand in the industry, and is made in the United...
www.ebay.com
Todd Bradshaw
Sailmaker
A search for "Tailnuts" or "Handle Nuts" will pull up several sources, most of which will be steel or iron, but that doesn't really matter much for this use. Even Amazon had some, though their price was crazy. Some other places were much better, like $18 per pair.
Attachments
David Satter
Wooden Canoe Maniac
Carlton, Do you still need them, ? I may have a couple. Dave, Also here https://www.mcmaster.com/products/handle-nuts/handle-nuts~/
ALCEDO ATTHIS
Enthusiastic about Wooden Canoes
did you try "bronze or brass" "handle nuts" , "wing nuts" "lever nuts" "brass dog bolt" "butterfly wing nut" "bicycle axle wing nut" ? and with a saw it's near of the truth
Last edited:
Similar threads
