Old Town H.W. 17' built in 1946

PHenry1969

New Member
I am working on restoring an Old Town HW from 1946 with sail rig. I have the original recite for the canoe based on serial number. I am trying to determine if the outer stems were canvas covered or exposed in this model of canoe and if they were covered in canvas how was the transition from canvas covered stem to uncovered keel was accomplished since the stems are higher than the bottom of the canoe where they meet the keel. Can anyone share pictures of their Old Town HW stem to keel junction and stems either shown exposed or un exposed. I would also like to determine house the metal stem protection strip interacted with the mounting hardware for the rudder. I have a rudder and the metal stem but the photos I have of the boat at the start of restoration shows a wide flat exterior stem with mounted angle bracket shaped rudder gudgeons and no metal protection strip.
 
In my experience, outside stems are never covered with canvas. Most certainly not on an Old Town, and never on any other canoes I have owned. White canoes were built with a formed copper strip that covered the stems, but that is unique to White canoes.....
The inside stems are covered with the seam where the canvas is closed on the bow and stern, then covered by the outside stems. Outside stems do receive stem bands. The gudgeons are installed over the stem bands. I'm not a sailor and no longer own a sailing canoe, but that is my recollection. Someone else who sails will undoubtedly provide the correct answer.
 
Back
Top