Latest activity

Long ago, I did not finish the interior before canvassing. Occasionally, either the stain or the varnish or both would affect the canvas...

Obviously, the Jeep caused it!!!

Hmmmm. Well, I do have an old Jeep CJ7 parked under the canoe. It runs pretty rich............... I also have an E.M White Guide...

I have encountered a similar situation. Not stains, but bumps from varnish that during hot/cold, moist/dry cycles had caused varnish to...

Perhaps test with rubbing compound or even very fine sandpaper to see if the problem is only on the surface rather than through the...

Good morning, About six years ago I built an Atkinson Traveler. The boat has been essentially unused since then and has hung inverted in...

I suspect that it would take longer to find a museum that wanted it than it would take to find an individual who did. Most museums (and...

I suspect that it would take longer to find a museum that wanted it than it would take to find an individual who did. Most museums (and...

these are what you are after, however they are reproductions turned from brass rather than stamped steel like the original fittings

these are what you are after, however they are reproductions turned from brass rather than stamped steel like the original fittings

twin holsters and pearl handled cap gun revolvers, a bowl of shredded wheat and the Lone Ranger on the radio. Shredded wheat omg thats...

That ad is really a piece of work. Oh baby. It is making me long for my twin holsters and pearl handled cap gun revolvers, a bowl of...

That could work but I think would be a big ask of the metal. Another solution could be to make a mould, spin the top visible part, cut...

Possibly a museum? Anyone have thoughts about that?

I would suggest a listing in the WCHA classifieds. The link below explains the process. The demand for these seems limited. Good luck...