Just completed this Yankee I picked up from WCHA member Tom Berl

Howie, have you weighed this canoe? I have growing interest in Dacron, and my next project;
may be a good candidate if the planking is smooth enough.
 
What you have there is an Old Town- I can tell by the shape of the decks. It look to be in great shape - well worth restoring. I note the ftont5seat has a hole for a sail mast and has a chunk of wood under the seat to hold the bottom of the mast. But like my canoe the rear area doesn't seem to have holes for hinges for the rudder. And both seats seem new, so it's likely the canoe didn't start life as a sail canoe.

Post a note in WCHA Forums with the serial nbr on the stem and somebody will tell you the canoes history.

O... and the Yankees I've restored have weighed between 68 & 74 lbs (all had filled canvas). Haven't weighed this one yet - ill do so tomorrow. I expect it'll weigh about 10 lbs less than it did before.
 
Howie, yes... Benson has already kindly provided the build sheet. 1919 HW model 16', delivered to Trenton, NJ. Clearly the seats are not original, nor is the mast step. Otherwise all seems original. It's a heavy SOB compared to all my 15' canoes; even heavier than the 17'6" filled new canoe!
 
If anyone is interested... I covered this one with Dacron. Just weighed it: 61 lbs - not bad for a 16 footer! I've restored 5 canvas 16ft Yankees (with #10 duck) and they average about 72 lbs. The canoe weighed 81# when I bought it, but I figure that was from multiple layers of additional paint.
 
Back
Top