Guideboat under construction

[Mike Howland]

Hello all,
I thought I'd post a few photos of my latest project. Something to look at on your lunch breaks.
It's a guideboat based on details within John Michne's book. Thanks also to Gary Jacuk for an extra set of plans he had printed out. (but yes, I did buy John's book along with several others

This is a stripper version of a guideboat so I know it's not authentic to the originals but it's my first attempt at boat building and it looked like I could contain it. Perhaps I'll plank the next one. The lumber's also unusual. It came from a factory that was torn down about 15 years ago. It was built in the 1850's I believe. Given the tightness of the grain, the timber must be old growth. It looks like cypress to me but I'm not 100% sure. Outer stems and other trim will be Cherry.
-mike

 

[pklonowski]

Mike, looks like some nice work...

Please see your PMs

 

[Mike Howland]

off the strongback today... a lot still to do!

 

[pklonowski]

Looking good!

 

[Gary Jacuk]

Well done. Seems like you've made a great deal of progress quickly.

 

[Mike Howland]

Well done. Seems like you've made a great deal of progress quickly.

Thanks Gary. I had a few weeks off during the holidays and we didn't travel so I was working 6 or 7 hours a day on it. Lot's of fun so far.
Currently scraping/sanding and refining the inside before moving forward. I won't be bored for a while.

 

[Mike Howland]

Progress continues (if only I didn't need to work...). A humbling experience but I think it'll float

 

[Mike Howland]

Progress... oars are next.
Being new to the process, I'm curious... how many coats of varnish? (Currently 3 coats of Interlux, wet sanded back lightly each time)

 

[JHomer]

Great looking boat...Do you have any completed photos? If you need hardware let me know.