Latest activity

  • D
    David E replied to the thread sail rigging.
    I've sailed my ACA rig a few times with the tack of the sail right up against the mast (I have hole drilled in the fore end of the boom...
  • floydvoid
    floydvoid replied to the thread sail rigging.
    I’m not saying use a sunfish rig, just to clarify, 80 square feet is a bit too much. Those aca sails ( though I want one) does not allow...
  • Benson Gray
    Benson Gray reacted to Howie's post in the thread Another Old Town: 176636 with Like Like.
    Thank you!
  • Howie
    Howie replied to the thread Another Old Town: 176636.
    Thank you!
  • John Sand
    John Sand reacted to David E's post in the thread sail rigging with Like Like.
    A standard Opti pram rig is useful..not reefable and a bit small for light winds on my 17 footers. I rig mine with carbon fibre mast...
  • Benson Gray
    Benson Gray replied to the thread Another Old Town: 176636.
    The Old Town canoe with serial number 176636 is a 16 foot long Otca model with a keel. It was built between August, 1966 and January...
    • 1782997378632.png
  • D
    David E replied to the thread sail rigging.
    PS..on the illustration above, I add an adjustable kicking strap or vang. Smarter minds than mine might have opinions on wisdom of that...
  • Benson Gray
    Welcome and congratulations, the Old Town canoe with serial number 105478 is 11.5 foot long dinghy that shipped in 1931 so that isn't a...
    • 1782996845304.png
  • D
    David E replied to the thread sail rigging.
    I always enjoyed sailing Sunfish and Sailfish as a kid in Barnegat Bay. Those plastic robands are not so canoe like but of course...
  • Howie
    Can I get some info on another Old Town please. # 176636. Im told its a 16 footer from the 60s
  • floydvoid
    floydvoid replied to the thread sail rigging.
    I posted this before and Todd talks about it in his book- Sunfish sailing has a ton of information on YouTube and the web, the rig is...
  • I
    Was gifted this canoe by an old friend, hoping to find out how old this is, it should be from the 70s or so. Serial #105478
  • W
    Worth Gretter reacted to Dave Osborn's post in the thread Re-planking with Like Like.
    Good point about gluing down any wood flaps that could save a plank, Worth!
  • Dan Lindberg
    Dan Lindberg reacted to Dave Osborn's post in the thread Re-planking with Like Like.
    If it were in my shop, I would remove the worst of the worst planks and replace them with planks from a “donor” canoe of similar patina...
  • Dan Lindberg
    Dan Lindberg reacted to MGC's post in the thread Re-planking with Like Like.
    The classic post glass mess. It's often ugly. What I generally do is make sure that I remove any remaining hardened resin that might...
Back
Top