This old canoe...

Serge Lemay

Curious about Wooden Canoes
Hello everyone, picked up this old/medium old canoe. Need help identifying it a bit more than what I know; which is this, it's at least 35 y/o, very probably build in Qc., and the rest is on the pictures. No trademarks/stickers visible, the thwarts are flat-bottomed, as got a mast pit/holder for sailing, flat bottom/keel, a slight tumblehome, and that's about it.

Any good web sites and books that I should consult??
 

Attachments

  • IMG_0164.JPG
    IMG_0164.JPG
    224.6 KB · Views: 463
  • IMG_1207.JPG
    IMG_1207.JPG
    277.3 KB · Views: 471
  • IMG_1356.JPG
    IMG_1356.JPG
    237.3 KB · Views: 449
  • IMG_1654.JPG
    IMG_1654.JPG
    289.1 KB · Views: 469
  • IMG_2233.JPG
    IMG_2233.JPG
    236.4 KB · Views: 463
  • IMG_2790.JPG
    IMG_2790.JPG
    223.2 KB · Views: 450
  • IMG_3063.JPG
    IMG_3063.JPG
    258.5 KB · Views: 454
  • IMG_3121.JPG
    IMG_3121.JPG
    199.7 KB · Views: 441
  • IMG_3900.JPG
    IMG_3900.JPG
    204.7 KB · Views: 451
  • IMG_4266.JPG
    IMG_4266.JPG
    213.5 KB · Views: 456
More images...
 

Attachments

  • IMG_4300.JPG
    IMG_4300.JPG
    176.1 KB · Views: 407
  • IMG_4610.JPG
    IMG_4610.JPG
    161 KB · Views: 402
  • IMG_7908.JPG
    IMG_7908.JPG
    215.8 KB · Views: 407
  • IMG_8574.JPG
    IMG_8574.JPG
    184.3 KB · Views: 406
Peterborough or Chestnut, after 1930s with a shoe keel. The sailing thwart was put in after as part of a kit, in most boats. Probably a low end Champlain, nice paddling boat.
 
So here are a few additional measurements DECKS: hearts-shaped concave 12" X 5". THWARTS - center: (At the inwale) 2 3/16" X 9/16" rectangle/ middle: 2" X 13/16" (half-round). RIBS : tapered 2 1/4" X7/16", tapering to 1 1/4" X5/16". PLANKS: 3" X 5/32". STEM is a square 13/16".
 
Back
Top