Help support the WCHA Forums by making a tax-deductible donation!

Anyone need strips in/near Michigan?

Discussion in 'Strippers, Stitch-n-Glue, and Other Wood Composite' started by Dave Wermuth, Jan 4, 2007.

  1. Dave Wermuth

    Dave Wermuth Who hid my paddle?

    I have some extra strips I mentioned in another post but will put it here too. I have some redwood 1/4' x 5/8' and some red cedar 1/4 x 3/4" . There are about ten 18' pieces of the cedar. if I recall correctly, well over 200 linear feet. it is bead/cove. If anyone wants it and is wiling to drive for it, it can be yours for free.
     
  2. Woodchuck

    Woodchuck Woodworker

    Yeah, Dave...
    I'm interested in the cedar to build my Ama... Can you wait till spring when I have my rack put back on the PU so I can put a ladder on the rack and then put the strip bundle on the ladder?
    Joe
     
  3. OP
    OP
    Dave Wermuth

    Dave Wermuth Who hid my paddle?

    Ok

    Hi Joe, you're the winna'. I'll private msg on the details of how to find lovely Lapeer.
     
  4. Art

    Art Curious about Wooden Canoes

    Hi Dave,
    I hope you don't mind me poking in with something unrelated but I think you might br able to help me.
     
  5. OP
    OP
    Dave Wermuth

    Dave Wermuth Who hid my paddle?

    email or pm me.
     
  6. Art

    Art Curious about Wooden Canoes

    shell of cedar strip

    Hi again,

    I have a 19 ft shell of a cedar strip canoe. It was taken off the form and stoered for a few years and I picked it up thinking I might finish it. Instead I have been doing up a bob's special. Anyway I'm wondering if it's worth anything amd if yes how much?
    The shape has stayed pretty well except the sides have rolled in. I put a couple spreaders in and it looks pretty good.
    If I could figure out how to attach some pictures I would do so.:(

    thanks,

    Art
     
  7. OP
    OP
    Dave Wermuth

    Dave Wermuth Who hid my paddle?

    WEll, I am not conversant in stripper construction. I finished one stripper, a Redbird. It had been stripped and the outside 'glassed but the inside not sanded or 'glassed.. I paid, as I recall $300 for the hull and finished it. I did not do a very good job, but it floated. I think there could be all sorts of problems with a canoe shell that has set for a time. But maybe a real stripper builder will post better info.

    Oddly enough, I am looking at a "Thompson" Shell in Traverse City that appears to be a stripper. I need to ask the seller more info about it because I am not sure what it is but it seems like a similar project to what you are considering. It is $100. I am not interested in doing another stripper so if anyone wants I can give further info.

    The TC project I am looking at seems priced fairly enough.
     

    Attached Files:

    • 3rb.jpg
      3rb.jpg
      File size:
      81 KB
      Views:
      368
    • 1rb.jpg
      1rb.jpg
      File size:
      87.1 KB
      Views:
      364

Share This Page