Help needed

Marvin

New Member
I have always wanted a wooden canoe and recently acquired one. I have never restored a canoe, but I do restore old bamboo fly rods. So, I'm going to need a lot of the forums' expertise. Before I start the restoration, process I need to identify the manufacturer so that I can do an accurate restoration. I was told it was made by the Ontario Canoe Co. (circa 1939). The only ID I can find is a diamond shaped plate under the midship thwart that reads O B 9-7. I will greatly appreciate any help I can get. I've attached six photos.

Thanks, Marvin
 

Attachments

  • HPIM1922.JPG
    HPIM1922.JPG
    840.7 KB · Views: 536
  • HPIM1925.JPG
    HPIM1925.JPG
    599.5 KB · Views: 522
  • HPIM1924.JPG
    HPIM1924.JPG
    811.9 KB · Views: 531
  • HPIM1921.JPG
    HPIM1921.JPG
    475.1 KB · Views: 529
  • HPIM1919.JPG
    HPIM1919.JPG
    620 KB · Views: 503
  • HPIM1931.JPG
    HPIM1931.JPG
    731.8 KB · Views: 520
Hi Marvin,

Your canoe is a molded plywood canoe, and while I can't place the maker right now, there were a number of builders of such canoes in the US, Canada and Europe. These included:

Haskell Manufacturing Company, Michigan
Plycraft, Nova Scotia (?)
Max Anderssens, Sweden
Old Town Canoe Co., Maine
Penn Yann, New York
Allied Aviation, Maryland
Moulded Products, successor to Allied Aviation

Some of these makers used what was apparently a generic term (though capitalized), "Weldwood". These included Old Town and Penn Yan. I think Old Town labeled theirs "Weldwood" on a decal applied on or under one of the seats.

Yours has a different deck style and some other distinct features relative to those I know of Max Anderssons and Haskell for sure. Not so sure about the others off the top of my head. However, there is a post of a canoe like yours here on these forums:

HERE is a link to the thread on the canoe like yours... note that the canoe has a tag under the thwart:

http://forums.wcha.org/showthread.php?t=2758

Hope this gets you started.

Michael
 
Last edited:
Back
Top