Help support the WCHA Forums by making a tax-deductible donation!

need 3/16" bead and cove bit source

Discussion in 'Strippers, Stitch-n-Glue, and Other Wood Composite' started by Bill Mackey, Aug 11, 2008.

  1. Bill Mackey

    Bill Mackey LOVES Wooden Canoes

    I am looking for a 3/16" bead and cove bit, new or used. Who knows the source?? Thanks
     
  2. paufacan

    paufacan canoe builder

    Check out Lee Valley Tools
     
  3. jchu

    jchu LOVES Wooden Canoes

    Hey Bill,
    I had bought the Lee Valley 1/8th radius canoe bits when I was trying to figure out what to do with this rib canoe. Never used them, part numbers 16j4201 and 16j4203. Blowout sale of half price of what they ask for them.

    Regards
    Jeff
     
  4. OP
    OP
    Bill Mackey

    Bill Mackey LOVES Wooden Canoes

  5. Woodchuck

    Woodchuck Woodworker

    Mlcs

    MLCS is the source for the flute and bead bits. They worked with several forum members and made them. They make the 1/4", 5/16" & 3/8" dia. in both 1/4" & 1/2" shank sizes. I used the 1/4" before the 5/16" came out and a lot of guys are using the 5/16" because the edges on the cove are not nearly so fragile and it does make a difference. IMHO Their website is as follows: http://www.mlcswoodworking.com
    CYA, Joe
     
  6. jchu

    jchu LOVES Wooden Canoes

    Bill I sent you an email, if you don't receive let me know.
     

Share This Page