Help support the WCHA Forums by making a tax-deductible donation!

Stephanie Lynn is finished

Discussion in 'Canoe Sailing' started by JClearwater, Jul 7, 2014.

  1. JClearwater

    JClearwater Wooden Canoe Maniac

    Stephanie Lynn is finally finished after nearly two years of free time effort. This is a 1943 CS grade Old Town Double End Boat. I replaced four ribs that were badly broken, repaired two others, about 10 ft. of planking, tips of stern inwales, replaced both decks (one was split badly so I replaced both so they matched) with Cherry and made a new floor rack and outwales which had gone missing before I got the boat. The sail rig was missing the mast step, both lee boards, lee board thwart, mast partner and all the hardware. I made all those parts. This boat was never varnished on the inside. Despite my best efforts at stripping I could not get all the old paint out so I repainted the original gray. I was successful removing the paint from the seat support rails and inwales. Being a war time boat most of the tacks were steel not brass. Luckily they were in good condition. I added at least one new tack thru each plank in every rib for peace of mind. The paint is Kirby #7 Green and #28 Reddish. The pin stripping and lettering is the only thing I didn’t do myself.

    The boat is named after my cousin’s wife who died at 40 leaving behind her husband Roger and two teenage daughters, Hannah and Rebecca. She will now live again dancing on the water in a breeze making people smile like she always did. We plan to christen the boat at the Assembly on the 16th. Everyone is welcome to join in the fun.

    Unfortunately Jean and I can only be at the Assembly Tuesday through Thursday because we are attending a wedding on Friday in PA.

    Jim C.
     

    Attached Files:

  2. MackyM

    MackyM LOVES Wooden Canoes

    Nice boat!!
     
  3. Greg Nolan

    Greg Nolan enthusiast

    Really nice -- I love the oak leaf/acorn detail, and the painted interior with the bright-finished details works really well -- better, perhaps, than all varnish. See you at Assembly.
    Greg
     
  4. Old_Paddler

    Old_Paddler Canoe nut

    Looking forward to sailing with you. I love the work your detailing guy did. Your boats are true works of art.
    See you at the Assembly. We will only be there on Thursday.
     
  5. divedog

    divedog LOVES Wooden Canoes

    Very nicely done!
     
  6. Treewater

    Treewater Wooden Canoes are in the Blood

    Beautiful. Just beautiful.
     
  7. OP
    OP
    JClearwater

    JClearwater Wooden Canoe Maniac

    Thank you everyone for your nice comments. I am very happy how it turned out. Jean and I took it out last Saturday afternoon but there was very little wind so we couldn't give it a very good test. I worry that the rudder is not big enough or that it doesn't stick down into the water deep enough. The rudder is the correct one for the boat but I think it was meant only for steering when the boat was being rowed, not for sailing. It is barely lower than the keel on the boat. At the Assembly maybe someone with more sailing experience than me can offer some advice. We will give it a go next week.

    Jim C.
     
  8. Benson Gray

    Benson Gray Canoe History Enthusiast Staff Member

    The boat looks great. A balanced sail rig doesn't need a huge rudder in most circumstances. Your leeboard thwart is easily adjustable to provide a broad range of options to balance the rig. You should always carry a paddle for emergencies and it can easily be used to help push you through a difficult turn (unless you are in a official sailing race). See you next week,

    Benson
     

Share This Page