Help support the WCHA Forums by making a tax-deductible donation!

Square ender identification?

Discussion in 'Research and History' started by Paul Fopeano, Jan 11, 2020.

  1. Paul Fopeano

    Paul Fopeano INNKEEPER

    Here is an old square ender that a friend has that needs a little attention. I have not seen it in person so I can only attempt to guess at it's manufacture. It has hints of Old Town - the cute little drawer under the bow seat, the common style of bronze oar locks that OT used. There are no signs of serial numbers. The the sponson are minute compared to what I know of OT's and it lacks the keelson found on my 16' OT. It's sheer is plain which is also not uncommon for motorboats but it does have gunwale caps at the stern that look very much like what Kennebec applied to their bows. The stern seat configuration while simple, resembles the seat in an Wm. English motorboat catalog photo. I am aware that the manufactures did evolve their designs over the decades and the few bits of printed information I have is won't get me too far. Anybody have any guesses?

    Length: 15' 2.5"
    Beam: 47" at gunwales 52" including sponsons and rub rails
    Beam at transom: 38.25"
     

    Attached Files:

  2. Benson Gray

    Benson Gray Canoe History Enthusiast Staff Member

    My guess would be a Kennebec Joy Boy but these were narrower and came standard in 14 or 16 foot versions. See http://www.wcha.org/forums/index.php?threads/9844/ for some pictures of one. Yours may be the Skowhegan version known as the Atta Boy and shown below (or a similar copy).

    Benson


    page-10.jpg
     
    Last edited: Jan 11, 2020
  3. OP
    OP
    Paul Fopeano

    Paul Fopeano INNKEEPER

    Thanks Benson! I will pass on the information..
     

Share This Page