Hello from Connecticut

Discussion in 'Guestbook' started by rayar3, Aug 10, 2017.

  1. rayar3

    rayar3 Curious about Wooden Canoes

    Hi everyone. My name is Ray, and today a canoe found my father and me. I received a text with a picture of the canoe and he just said, "it's free, do you want it?" It was a client of my father that owned the boat. His wife wanted to turn it into a planter.

    So I hooked up my empty canoe trailer and drove over to take a look, and we brought it home. I know nothing about wooden canoes other than I was thinking about building a CLC strip canoe this winter. This canoe doesn't appear to be that old, so it might be a nice learning experience. I'd like to cover it with canvas unless someone here talks me out of it!

    Other than the fact it's a Great Canadian, I can't find much info on this model. It's a bit shy of 15' and overall similar to my old Grumman Sport Boat so it looks like it might be fun to make into a fishing/sailing canoe.



    IMG_0464.JPG IMG_0044.JPG IMG_0466.JPG IMG_0467.JPG
     
  2. MGC

    MGC Paddlephile

    Ray,
    That looks like it's far too nice for a petunia bed!
    Some boats like yours are purpose built with fiberglass. Removal, if even possible, can be a nightmare.
    I would be tempted to improve upon the interior (sand and varnish) and then do the same with the hull. Fiberglassed hulls can tolerate a bit of very judicious sanding to prep them for a coat of either good quality marine varnish or paint. The varnish and the paint provide protection from UV damage.
    As Benson notes, those tiny cracks are a non-issue. They result from the nails securing the ribs to the inside rails. You won't find too many boats (with this type of construction) that don't have a few of these splits.
     

Share This Page