Help support the WCHA Forums by making a tax-deductible donation!

Cracks in Sassafras

Discussion in 'Paddles and Paddle Making' started by RRHenseler, Feb 6, 2015.

  1. RRHenseler

    RRHenseler The Canoeist

    I've been working on a paddle from what looked like a beautiful piece of sassafras. As I carved into the board I exposed a lot of small cracks or checks in the grain. Any suggestions for to best way to fill them, and is this a common problem with sassafras?
     
  2. Rob Stevens

    Rob Stevens Wooden Canoes are in the Blood

    I have seen that before, in a paddle I carved. I was told that is called "honeycombing", caused by kiln drying too fast. I scrapped the paddle, but you could fill them with epoxy or wood filler if you just want a functional paddle. Then paint?
    Sassafras is a wonderful working wood and makes a strong, relatively lightweight paddle.
     
  3. chris pearson

    chris pearson Michigan Canoe Nut

    Cut a slot in the end of the blade if they are in that area and add a slice of wood with west system. The PC of wood should be perpendicular to the paddle.
     

Share This Page