Help support the WCHA Forums by making a tax-deductible donation!

Canoe Returned to Chinook Tribe by Clark Descendants

Discussion in 'Birchbarks, Dugouts and Primitive Craft' started by abhraxas, Sep 27, 2011.

  1. abhraxas

    abhraxas LOVES Wooden Canoes

  2. crosscuts

    crosscuts LOVES Wooden Canoes

    The Associated Press ran the story of the replacement of the canoe stolen by Lewis and Clark on Sept. 24. The canoe was built by the Applegate Boat Works in Veneta, Oregon. Construction is plywood on hard chine frame.

    R.C.
     
  3. Benson Gray

    Benson Gray Canoe History Enthusiast Staff Member

  4. OP
    OP
    abhraxas

    abhraxas LOVES Wooden Canoes

    Thanks to all for the information!
     
  5. jkohnen

    jkohnen New Member

    I'm one of the guys turning the big canoe in the photo that ran with that article in many papers (taken with my camera by Laura McCallum). :) Here are some more photos of the canoe during its construction:

    http://www.flickr.com/photos/jkohnen/sets/72157626932213867/

    http://www.flickr.com/photos/jkohnen/sets/72157627346113994/

    John McCallum of Applegate Boatworks is an expert on NW Indian canoes. The original dugouts had a flat-bottomed, dorylike midsection, so using plywood to construct replicas isn't a stretch. The hard part is getting the plywood sides to conform to the sharp, almost finlike forefoot and "sternfoot, but John has become quite adept at persuading plywood to do what it doesn't want to do. The canoes have no internal framing except the thwarts, and stitch 'n' goo is used at the chines. John's canoes are very close in shape and performance to the original dugouts. He's built canoes for several of the NW tribes. In fact, the tribes keep him so busy he isn't doing much of anything else nowadays! :)

    John Kohnen
     

Share This Page