View Full Version : info on recanvasing
onbye
02-25-2006, 01:16 AM
Hello,
I have recently bought a 1915 O.T. and i believe it has been fiberglassed over canvas. where do I look for information on recanvasing the boat. I am told recanvasing is the way to go. I have also been told recanvasing is no harder than fiberclassing and I have done lots of that. any information would be wonderful. thank you for your time.
Mark
yelnif
02-25-2006, 02:07 AM
Hi Mark,
You have the right direction now pick up or borrow a book or two on building a cedar canvas canoe - builders/ suppliers link ( they go from start to finish-very complete). To me the canvasing is the only way to go- and you are lucky there is /was a layer of canvas between the siding and the fiberglass. We all like to view before and after shots if possible? Good luck- and let us hear how it went. My tooney's worth- Lee...
Andy Hutyera
02-27-2006, 11:06 AM
Mark,
The book you want is The Wood Canvas Canoe by Rollin Thurlow and Jerry Stelmok. It's available at the WCHA store at this link: http://merchandise.wcha.org/index.php?cPath=92&sort=2a&page=2
I can also highly recommend Jerry's book on Joe Seliga. It has great photos of the canvasing process using Joe's upside down method that I much prefer. It's also available at the store.
Have fun!
Dave Wermuth
02-27-2006, 08:33 PM
Or you could stop by the Quiet Water Symposium this Saturday and see Gil do it in person. East Lansing is the place to be.
LenLee
02-27-2006, 11:36 PM
Or you could stop by the Quiet Water Symposium this Saturday and see Gil do it in person. East Lansing is the place to be.
Wish I could go watch (or heckle) Gil. He taught me how to use his upside down method years ago (the canoe, not the recanvasser) and I'll bet I can recanvas a canoe quicker than he can make one into a bookcase! :rolleyes:
ebeeby
03-19-2006, 02:57 PM
Here's a link to some photos of my experience with the forum's upside down method:
http://members7.clubphoto.com/eric520065/1740644/owner-ef36.phtml
vBulletin v3.5.1, Copyright ©2000-2008, Jelsoft Enterprises Ltd.